What the law says about fire extinguishers at work, which type suits which fire, how many you need, where to put them and how often they must be serviced.
Fire extinguishers are part of every fire risk assessment, and they are easy to get slightly wrong. The wrong type by the fryer, an extinguisher propping open a fire door, or a service label that is two years out of date. None of it is hard to put right once you know what the rules actually ask for.
What the law says
In England the duty comes from Article 13 of the Regulatory Reform (Fire Safety) Order 2005. Where it is needed to keep people safe, the responsible person must make sure the premises are equipped with appropriate fire-fighting equipment, and that it is easily accessible, simple to use and indicated by signs.
The Order does not give a number. What is appropriate depends on the size and use of the building, the equipment in it, the substances likely to be there and the most people who could be present at one time. That is why the answer comes out of your fire risk assessment rather than a one-size rule. Article 13 also asks you to nominate competent people to carry out your fire-fighting measures and make sure they are trained and properly equipped.
Which type for which fire
No single extinguisher is right for every fire. The London Fire Brigade’s guidance note on portable equipment sets out the fire classes and the main types. All extinguishers have a signal red body, with a small coloured band to show what is inside:
- Water (red): for Class A fires in solids such as paper, wood and fabric. Fine for most offices and shops, but not for burning oil or electrical fires.
- Foam (cream): for Class A and Class B fires in flammable liquids.
- Carbon dioxide, CO2 (black): for Class B fires and often supplied for areas with electrical equipment.
- Powder (blue): covers several classes of fire, including Classes A and B.
- Wet chemical (yellow): made for Class F fires in cooking oils and fats, so it belongs in any kitchen with a deep fat fryer.
- Fire blankets: useful in kitchens for small pan fires and for wrapping someone whose clothing has caught fire.
Water mist extinguishers, which have a white body, are also available. If you run a commercial kitchen, my article on gas interlock systems covers another piece of kitchen equipment that is often missed.
How many you need
As a starting point, Greater Manchester Fire and Rescue Service gives a rule of thumb of one extinguisher for every 200 square metres of floor space, with at least one on each floor. Small premises may need only one or two. Larger or higher-risk buildings usually need more, and specific risks such as a kitchen, a workshop or a server cupboard need the right type close by.
The detailed British Standard for choosing and positioning extinguishers is BS 5306-8, and new extinguishers should meet BS EN 3. A good supplier will work to both, but the decision on what you need should still follow your risk assessment.
Where to put them
The London Fire Brigade guidance says extinguishers should normally be in conspicuous positions on escape routes, preferably near exit doors. That way someone heading for the exit passes one, and if they decide to tackle a small fire they still have their way out behind them.
- Hang them on wall brackets or in purpose-made stands, not on the floor where they get kicked over or used as door stops.
- On each floor, site them on the escape routes, and near particular risks such as kitchens and electrical intake cupboards.
- If an extinguisher is out of direct view, put up a sign showing where it is.
- Keep them clear of stock, coats and furniture so they can be reached in seconds.
Checks and servicing
Article 17 of the Fire Safety Order says fire equipment must be kept in an efficient state, in efficient working order and in good repair. For extinguishers, the London Fire Brigade guidance says a basic service should be carried out every year by a competent person, with extended servicing, including discharge and recharge, done as set out in BS 5306-3.
Between services it is worth a quick look as part of your routine checks: is each one in its place, undamaged, with the pin and seal intact and the gauge (where fitted) in the green? Note your checks and the annual service in your fire safety records. Your fire wardens can take this on, and my article on how many fire wardens you need explains their role.
Finally, an extinguisher is only for small, contained fires. Your first priority is always to raise the alarm and get people out. Nobody should put themselves at risk to save the building.
How I can help
My fire risk assessments look at whether your extinguishers are the right type, in the right places and properly maintained, and the action plan tells you exactly what to change. If you want a second opinion or a fresh assessment, get in touch or call me on 07905 199 521.
Not sure your extinguishers are right?
A fire risk assessment checks your fire-fighting equipment alongside everything else, with a clear action plan.
Keep reading